Design features:

1. All shaft supports are roller bearings. Materials for the shafts are alloy steel.

2. Forced lubrication is used for all chains.

3. Grooved drum: there are ventilating air tube clutches at the high/ low speed end of the drum. Circulated water forced cooling mode is adopted for brake hub (the brake disc of disc brake uses circulated water forced cooling or air cooling), which has been surface quenched, with good wear resistance, long service life.

4. Sprocket tooth profile surface has been quenched at the intermediate frequency. All shifting clutches are in volute spine gear clutch.

The design features of mono-shaft drawworks:

1. The mono-shaft drawworks consists of AC VF motor, gear reducer, hydraulic disc brake, DW frame, drum shaft assembly, auto-bit feeding device and control system etc.

2. The drawworks is driven by AC VF motors, which is powerful and with a wide VF speed regulation scope.

3. Gear drive has high efficiency, with less vibration and low noise, and has long service life.

4. There is no shifting device with the drawworks, and stepless regulation has been done by controlling AC VF regulator.

5. The drawworks structure is mono-shaft grooved drum; compare with the same type drawworks, it has less parts , smaller volume and less weight.