Major features:
K type mast is made of H steel, and has the advantages of wide eyeshot and convenient transportation.
The substructure is Block package type; while drawworks and mast adopt low-position installation and being lifted upon drawworks power.
Drawworks is a seal type chain transmission drawworks which has 4 forward gears+2 reverse gears (or 6 forward gears+2 reverse gears), and it equips auxiliary drive device for mast lifting and emergency lifting.
Between each part of rig transmission system adopt cardan shaft connection, which is convenient to install and disassemble.
Overall layout of the rig is reasonable, while its modularization can meet the requiremen ts of integrally lifting, train and truck transportation.
The rig has advantages of wide matching range, high mechanization degree and good operation adaptability.
Main technical parameters:
1 |
Nominal drilling depth |
3500 ~ 5000m （ 114mmDP ） |
9 |
Quantity and power of drilling pump |
2× 1600 hp |
2800 ~ 4500m （ 127mmDP ） |
10 |
Substructure type |
Block package type |
2 |
Max hook load |
3150 kN |
11 |
Substructure height and clear height under RT beam |
7.5m ， 6.3m |
3 |
Wire rope system of traveling system |
6x7 ， parallel |
12 |
Mast type and effective height |
K TYPE ， 44.5m |
4 |
DW rated power |
1100 kW （ 1500 hp ） |
13 |
Transmission mode |
hydraulic transmission and chain paralleling |
5 |
DW gear |
4 gears |
6 gears |
14 |
Quantity/power of main diesel engine |
3x810kw |
4 forward+ 2 reverse |
6 forward+ 2 reverse |
15 |
Quantity and power of auxiliary generator set |
2×320kW |
6 |
Diameter of drilling wire rope |
φ 35mm |
7 |
RT opening diameter |
952.5mm （ 37 1/2″ ） |
16 |
HP mud manifold |
φ 102mm （ bore diameter ） ×35MPa |
698.5mm （ 27 1/2″ ） |
8 |
RT gear |
4 forward+ 2 reverse |
6 forward+ 2 reverse |
17 |
Effective mud volume of solid control system |
320m3 |
|
|
1997-2009 HongHua Co.,Ltd. All rights reserved